Purchasing personal protective equipment
For many businesses, workwear and personal protective equipment (PPE) as well as safety supplies represent a day-to-day essential. Purchasing the right PPE is key, as this will help to minimise the risks associated with performing hazardous tasks and may even save lives.
However, because onsite workwear is so commonplace, companies do not always put a lot of thought into their policies on PPE purchasing and use. It may be seen as a mundane formality rather than a decision-making process that requires careful consideration.
One of the most vital considerations when developing a PPE policy is knowing that protective workwear should always be seen as an addition to a rigorous workplace safety policy rather than a replacement for it. PPE is designed to offer protection against possible injury-causing hazards such as dangerous machinery, falls from height, toxic substances and extreme temperatures - all of which are dangers that should ideally be eliminated through careful risk management and safe systems of work.
A key mistake that companies can make is adopting a generic approach when allocating workwear, workplace supplies and PPE rather than actually thinking about the specific needs of the job at hand. Not all items of PPE are the same. Regulators have strict rules in place to make sure that any protective workwear used in professional circumstances is fit for purpose, and these rules need to be followed at all times. It is also important to take the time to make sure staff members are well-trained and know exactly how to use PPE.
High-quality PPE is designed to be durable, but nothing lasts forever, especially when exposed to regular wear and tear. That’s why it is vital to look after workwear and to replace it when it is no longer fit for use. Good health and safety in the workplace requires continual investment and monitoring, and PPE and workwear are no exception.
[edit] Related articles on Designing Buildings
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.